September 23, 2021

One of the most misunderstood concepts of suspension geometry is jacking forces. The following video not only outlines their origins, but also some tips and tricks in how to quantify jacking forces. Enjoy and this one is live to camera!

January 24, 2019

We are proud to present ChassisSim Driver in the loop. For a quick introduction check out this presentation that was first delivered at Professional Motorsport World Expo in Cologne Germany on November 7 2018. Enjoy,

August 30, 2018

Even though this is somewhat belated we at ChassisSim are proud to announce that ChassisSim customer Jota Sport secured a 1-2 finish in the LMP2 category at the 6 Hours of Silverstone on Aug 19 2018. “I’m absolutely delighted for […]

July 3, 2018

At the six hours of the Glen on July 1 2018 ChassisSim customer JDC-Miller Motorsports took line hours in their LMP2 Oreca07, JDC-Miller Breaks Through for First Win at Watkins Glen “This has been a long time coming. I’m absolutely […]

January 18, 2018

Determining ride heights is an important and common job for a race/data/performance engineer. The following simulation plot shows how important this is. In this latest ChassisSim tutorial you’ll be shown how to do this in 3 minutes. Enjoy.

August 9, 2017

The difference between ChassisSim and other lap time simulation software, is ChassisSim is dynamic. Dynamic, means the race car is calculated in real time, as if the race car is being run on the circuit. Other simulation software is pseudo […]

September 22, 2016

In this latest episode of Dan’s Vehicle Dynamics Corner, Danny Nowlan the Director of ChassisSim Technologies, discusses the importance of the differential and how to tune it with ChassisSim. Enjoy,

August 25, 2016

In this latest video tutorial – Danny Nowlan the Director of ChassisSim Technologies shows you how straight forward it is to get going with ChassisSim. Enjoy

July 14, 2016

This video an overview at what to look for in simulated data and what to focus on. Enjoy.

March 5, 2015

On March 3 2015 Danny Nowlan the Director of ChassisSim presented a webinar on behalf of Altair Engineering. The webinar was entitled… “Motorsport to Automotive – Crossing the thought barrier. Using ChassisSim solve your vehicle dynamics problems quickly” It was […]